当前位置:首页 > 过刊浏览->2026年第37卷第5期
油浆蒸汽发生器制造难点及解决措施
Manufacturing Difficulties and Solutions for Slurry Oil Steam Generators
浏览(3) 下载(0)
- DOI:
- 作者:
- 方源嵩
Fang Yuansong
- 作者单位:
- (蓝海新材料(通州湾)有限公司,江苏 南通 226333)
(Lanhai New Materials (Tongzhou Bay) Co., Ltd., Nantong 226333, China)
- 关键词:
- 油浆蒸汽发生器;焊接控制;整体组装;15CrMo;厚管板
steam generator; welding control; overall assembly; 15CrMo; thick tube sheet
- 摘要:
- 鉴于催化油浆介质含大量催化剂颗粒、冲蚀磨损问题突出的工况条件,釜式油浆蒸汽发生器得到了广泛应用。相比于传统 U 型管结构,釜式结构在高固含量、强冲蚀工况下优势显著。本文重点阐述了釜式油浆蒸汽发生器的结构形式与设备特性,系统分析其制造过程中的核心难点,并针对各工序制造痛点提出对应的工艺控制措施。同时优化设备整体组装工艺顺序,可为同类型耐热钢厚管板换热设备的制造工艺设计与质量管控提供工程参考。In view of the operating conditions of catalytic slurry medium containing a large number of catalyst particles and promi⁃nent erosion wear problems, kettle-type slurry steam generators have been widely used. Compared with the traditional U-tube struc⁃ture, the kettle-type structure has significant advantages under working conditions with high solid content and severe erosion. Thispaper focuses on the structural form and equipment characteristics of the kettle-type slurry steam generator, systematically analyzesthe core difficulties in its manufacturing process, and puts forward corresponding process control measures for the manufacturingpain points of each procedure. Meanwhile, the overall assembly process sequence of the equipment is optimized. The research canprovide engineering reference for the manufacturing process design and quality control of similar heat exchange equipment withthick tube sheets made of heat-resistant steel.
