当前位置:首页 > 过刊浏览->2026年第37卷第5期
LZ-5G型脱硝助燃剂在催化装置的应用与效果评价
Application and Effect Evaluation of LZ-5G Denitrification and Combustion-supporting Agent in Catalytic Cracking Unit
浏览(4) 下载(0)
- DOI:
- 作者:
- 郑 坤1 ,范夏华1 ,蒋 毅1 ,赵惠生2 ,薛洁文1 ,王 宸1 ,王小宁1
Zheng Kun1 , Fan Xiahua1 ,Jiang Yi1 , Zhao Huisheng2 ,Xue Jiewen1 , Wang Chen1 , Wang Xiaoning1
- 作者单位:
- (1.中国石油玉门油田公司炼油化工总厂,甘肃 玉门735200;2.昆冈先进制造(北京)兰州分公司催化剂事业部,甘肃 兰州730060)
(1. Refining and Chemical General Plant, Yumen Oilfield Company, PetroChina, Yumen 735200, China; 2.Lanzhou Branch of Kungang Advanced Manufacturing (Beijing) Co., Ltd, Lanzhou 730060, China)
- 关键词:
- 催化裂化;氮氧化物;脱硝助燃剂;应用情况
catalytic cracking; nitrogen oxide; denitrification and combustion aids; application
- 摘要:
- 氮氧化物是石化行业典型的大气污染物,既是诱发酸雨的核心成因之一,会造成土壤酸化、植被破坏与设备腐蚀,还可与大气臭氧层发生氧化反应,持续消耗臭氧组分,扰乱大气臭氧层动态平衡,加剧环境污染与温室效应问题。在炼厂生产单元中,催化裂化装置烟气排放量巨大,是厂区主要的废气排放源头,其烟气排量占全厂总排放量的40%左右,直接主导全厂烟气环保排放指标,对企业合规生产至关重要。因此,精准管控烟气中氮氧化物浓度、实现稳定达标排放,已成为该催化装置安全连续运行的关键前提。为解决装置脱硝能力不足、NOx排放偏高的问题,现场采用LZ-5G型脱硝助燃剂开展工业应用,在2%的常规添加比例下,可将装置烟气中的NOx浓度稳定控制在80 mg/m³左右,有效优化了烟气排放指标,满足严苛的环保管控要求。Nitrogen oxides are typical atmospheric pollutants in the petrochemical industry. As one of the primary causes of acidrain, they can lead to soil acidification, vegetation damage and equipment corrosion. Meanwhile, nitrogen oxides can undergo oxida⁃tion reactions with atmospheric ozone, continuously depleting ozone components, disturbing the dynamic balance of the ozone layerand aggravating environmental pollution and greenhouse effects. Among refinery production units, the fluid catalytic cracking (FCC)unit is a major source of waste gas emission, whose flue gas accounts for approximately 40% of the total plant emissions and directlydetermines the overall flue gas environmental indicators, which is critical for compliant production. Therefore, precise control of fluegas NOₓ concentration to achieve stable emission compliance has become a key prerequisite for safe and continuous operation of theunit. To address insufficient denitration capacity and high NOx emissions, the LZ-5G denitration and combustion-supporting agentwas applied industrially. At a conventional addition ratio of 2%, the flue gas NOx concentration can be stably reduced to around 80mg/m³, effectively improving emission indicators and meeting stringent environmental control requirements.
