当前位置:首页 > 过刊浏览->2026年第37卷第5期
旋转滴法测定界面张力的不确定度评定
Uncertainty Evaluation for Interfacial Tension Measurement by Spinning Drop Method
浏览(4) 下载(0)
- DOI:
- 作者:
- 任培培1,2,3,4 ,李 翔1,2,3 ,彭雪飞1,2,3 ,刘艳敏1,2,3,4 ,刘海涛1,2
Ren Peipei1, 2, 3, 4 , Li Xiang1, 2, 3 , Peng Xuefei1, 2, 3 , Liu Yanmin1, 2, 3, 4 , Liu Haitao1, 2,
- 作者单位:
- (1.海洋油气高效开发全国重点实验室,北京 102209;2.天津市海洋石油难动用储量开采与低碳负碳重点实验室,天津 300459; 3.中海油田服务股份有限公司,天津 300459;4.广东南油服务有限公司,天津 300459)
(1.State Key Laboratory of Offshore Oil and Gas Exploitation, Beijing 102209, China; 2. Tianjin Key Laboratory of Offshore Difficult-to-Recover Reserve Exploitation and Low/Negative Carbon, Tianjin 300459, China; 3. China Oilfield Services Limited, Tianjin 300459, China; 4. Guangdong Nanyou Service Co., Ltd., Tianjin 300459, China)
- 关键词:
- 计量学;界面张力;不确定度评定;表面活性剂;旋转滴法
metrology; interfacial tension; uncertainty evaluation; surfactant; spinning drop method
- 摘要:
- 为提升三次采油领域界面张力测量的精度与数据可靠性,依据 SY/T 5370-2018《表面及界面张力测定方法》,采用旋转滴法对磺酸盐型表面活性剂与航空煤油体系的界面张力进行测定。基于冯内古特(Vonnegut)原理建立数学模型,系统分析重复性测量、转速控制、直径测量、密度测量及配液过程等不确定度来源,通过 A 类与 B 类评定方法量化各分量贡献。结果表明,该体系界面张力测量结果为(0.002 10±0.000 24)mN/m(k=2,置信概率95%),其中重复性测量是影响不确定度的主要因素。建立的不确定度评定模型填补了现行标准中相关评估方法的空白,为油田化学剂性能评价的计量溯源提供了科学依据,也为同类界面张力测量实验的质量控制提供参考。To improve the accuracy and data reliability of interfacial tension measurement in tertiary oil recovery, the interfacial tension of the sulfonate surfactant-jet fuel system was determined by the spinning drop method in accordance with SY/T 5370-2018Standard Test Method for Surface and Interfacial Tension. A mathematical model was established based on the Vonnegut principle,and the sources of uncertainty, including repeatability measurement, rotation speed control, diameter measurement, density measurement, and solution preparation process, were systematically analyzed. The contribution of each uncertainty component was quantifiedusing Type A and Type B evaluation methods. The results showed that the measured interfacial tension of the system was (0.002 10±0.000 48) mN/m (k=2, confidence level of 95%), and repeatability measurement was the primary factor affecting the uncertainty. Theestablished uncertainty evaluation model fills the gap in relevant evaluation methods in current standards, provides a scientific basisfor metrological traceability in the performance evaluation of oilfield chemicals, and offers a reference for quality control in similarinterfacial tension measurement experiments.
