当前位置:首页 > 过刊浏览->2026年第37卷第5期
超低硫重质船用燃料油的研制与开发
Research and Development of Ultra-Low Sulfur Heavy Marine Fuel Oil
浏览(4) 下载(0)
- DOI:
- 作者:
- 田 欢,曾 海,关 勇,梁士军
Tian Huan, Zeng Hai, Guan Yong, Liang Shijun
- 作者单位:
- (中国石油辽河石化公司,辽宁 盘锦 124022)
(Liaohe Petrochemical Company, PetroChina Panjin 124022)
- 关键词:
- 超低硫;重质船用燃料油;调和工艺
ultra-low sulfur; heavy marine fuel oil; blending process
- 摘要:
- 2015年,国际海事组织对控制区使用的船用燃料油提出了硫含量≤0.10% 的限制要求,国内外控制区和港口先后实施了该规定。目前应用的超低硫船用燃料油多以轻质柴油为主,存在黏度低、易挥发等缺陷。某企业以低硫环烷基原油加工为核心业务,通过调和工艺生产的低硫船用残渣燃料油具有黏度高、硫含量低的特性,在超低硫重质船用燃料油开发方面具备原料优势。为此,该企业对现有低硫船用燃料油调和组分开展分析与筛选,进行调和工艺开发,并系统评估超低硫重质船用燃料油的研发可行性。实验结果表明:船用燃料油调和组分的运动黏度与硫含量通常呈正相关,二者难以同时兼顾;优选适配的调和组分是采用调和法制备超低硫重质船用燃料油的技术核心。在此基础上,通过优化超低硫船用燃料油调和配方,成功研制出硫含量及各项性能指标均达标的超低硫重质船用燃料油。与国际同类产品对比,该产品兼具低硫、高黏度、高闪点与低倾点等优势,既满足了硫含量的环保限值要求,又保留了残渣型船用燃料油高黏度的优良特性。In 2015, the International Maritime Organization (IMO) stipulated that the sulfur content of marine fuel oil used in emis⁃sion control areas (ECAs) shall not exceed 0.10%, and this regulation has been successively implemented in control areas and portsat home and abroad. Currently, the widely applied ultra-low sulfur marine fuel oil is mainly based on light diesel oil, which suffersfrom drawbacks such as low viscosity and high volatility. An enterprise focuses on processing low-sulfur naphthenic crude oil. Thelow-sulfur residual marine fuel oil produced via blending process features high viscosity and low sulfur content, endowing it withraw material advantages for the development of ultra-low sulfur heavy marine fuel oil. Therefore, the enterprise analyzed andscreened existing blending components for low-sulfur marine fuel oil, developed blending processes, and systematically evaluatedthe feasibility of developing ultra-low sulfur heavy marine fuel oil. Experimental results demonstrate that the kinematic viscosityand sulfur content of marine fuel oil blending components generally show a positive correlation, and it is difficult to satisfy both indi⁃cators simultaneously. Selecting appropriate blending components serves as the technical core for preparing ultra-low sulfur heavymarine fuel oil by blending method. On this basis, the blending formula of ultra-low sulfur marine fuel oil was optimized, and an ul⁃tra-low sulfur heavy marine fuel oil product with qualified sulfur content and all performance indicators was successfully developed.Compared with similar international products, the developed product has advantages including low sulfur content, high viscosity,high flash point and low pour point. It meets the environmental limit requirement of sulfur content and maintains the favorable highviscosity characteristic of residual marine fuel oil.
